Climbing (Challenge Courses/Towers - High Elements)
An element that requires the use of a belay in normal operation
Secondary - Curricular 2024
- Permanent Installation on a School or Commercial Site.
- Also consult Climbing (General Procedures).
Equipment
-
All equipment must be inspected by qualified on site ropes/challenge course personnel prior to activity to determine that all equipment is safe for use.
-
All equipment must meet current Association for Challenge Course Technology (ACCT) standards.
-
Belay devices must be connected with a locking carabiner rated at 22kN/2200kg/4945lbs., where commercial friction or camming devices are used.
-
Climbing ropes must be compatible with the chosen belay device and the climbing activity.
-
Climbing harnesses (sit, sit/chest, or full body) appropriate to the age and/or body size of the climber must be used.
-
For all indoor installations, mats (for example,, Velcro utility mats, wrestling mats) must be in place at the ascending and descending points. Mat thicknesses:
-
cross-link foam 5cm (2’’)
-
open-cell foam 5cm (2”)
-
polyurethane 5cm (2”)
-
dual-density 5cm (2”)
-
mats of equivalent compaction rating as determined by manufacturer
-
-
Helmets:
-
The wearing of a helmet (or not) must be professionally determined based on the existing hazards in the facility (for example, toe/hand holds, features) and/or the operating system (for example, auto-belay).
-
Facilities must provide helmets when their use is not hazardous or when they are required by the school/board, or parents/guardians.
-
When appropriate, helmets that are commercially and specifically manufactured for climbing must be properly fitted (as per manufacturer’s guidelines) and properly worn.
-
Clothing/Footwear/Jewellery
-
Clothing and footwear appropriate to the chosen activities and environmental conditions must be worn. Open-toed shoes, (e,g, sandals) are not permitted. Loose clothing not is permitted. Tops with drawstrings are not permitted.
-
No sharp objects are to be worn or carried in pockets.
-
Exposed jewelry is not permitted.
Facilities
-
Challenge course activities that are selected must be appropriate for ability levels, age and size of students.
-
All challenge course elements must have been installed, or have passed an annual professional safety inspection, by a qualified Challenge Course Professional as defined in the most current edition of The Association for Challenge Course Technology (ACCT) Challenge Course Standards or equivalent.
-
All challenge course elements must meet the ACCT Standards that are in place at the time of installation.
-
All challenge course elements must be inspected annually by a qualified Challenge Course Professional, using the most recent edition of the ACCT.
-
This inspection must be documented in a written report in accordance with the ACCT.
-
Necessary maintenance/changes to the elements noted in the report must be addressed.
-
All challenge course elements must be inspected by qualified site personnel prior to use.
-
The challenge course must be managed and operated in accordance with the most current ACCT, including having a designated Challenge Course Manager who is responsible for overseeing the staffing and operations of the challenge course.
-
The challenge course must be used in accordance with the current Challenge Course Professional’s recommendations.
-
Treed courses must be inspected annually by a professional challenge course vendor and dead limbs and any live branches that might be considered hazardous must be removed.
-
Any live branches that may be considered a hazard must be removed.
-
All courses built in trees must have an adequate thickness of wood chips at the base of all elements.
-
Treed courses must not be used in high winds or thunder-storms.
Environmental Considerations
Special Rules/Instructions
-
Completed medical forms for each participating student must be accessible.
-
Prior to the first lesson, Teachers must inform Qualified Climbing Instructors of students who have special needs.
-
Risks involved with each activity and how to lower the risk of an injury from occurring must be communicated to students.
-
Activity and course elements that are introduced must be based on skills that are taught and appropriate for the age, ability level, language and and experience of the students.
-
Students must be allowed to select a challenge at their comfort level, including the choice to not participate. Teachers and Monitors must be aware of the possibility of peer pressure and make sure no student is coerced into participating.
-
Students must be made aware of expectations as they relate to:
-
behaviour;
-
emergency procedures;
-
signal to assemble; and
-
boundaries for activities.
-
-
The site must have a written Policies and Procedures Manual for the management and operation of all challenge course activities. This manual must include an Emergency Action Plan consistent with the most current ACCT Challenge Course Standards.
-
Students waiting at the top of rappel towers must be outfitted in proper fall protection or a barrier must be put in place.
-
A method of rescuing a tired/stuck climber must be available (for example, ladder, scaffold, top-rope belay).
-
Individuals who have been trained and can demonstrate the required instructor skills and who are 16 years of age or older can assist with instruction but must be directly supervised by a Qualified Instructor.
Belaying
-
Programs may be offered utilizing the following fall protection operating systems:
-
Programs are required to follow the ratios related to the Grade Level and fall protection operating system as indicated in the Supervision section.
-
A Qualified Instructor must check the harness and connection to the Fall protection operating system for any student prior to them leaving the ground.
-
The fall protection operating system utilized must be one that was installed and recommended by a qualified Challenge Course Professional.
-
The climber-to-belayer weight ratio must be taken into consideration when determining the number of buddy belayers necessary in any non-ground anchored system. In most conventional top-roped belay systems, an approximate climber-to-belayer weight ratio is 1:1.
Full Belaying
-
When students are belaying, an introductory lesson, incorporating the following elements must precede top-roped climbing:
-
must be identified as challenge course specific;
-
must be identified as specific to the belay system/device being used;
-
must include instruction and repeat practice on:
-
correct use of harness
-
correct use of knots and tie-in points
-
concept of top-roping
-
correct use of belay device/system
-
general principles for belaying with the specific system
-
lowering procedures with the specific system
-
communication and the climber/belayer contract
-
-
-
When students are belaying, a system/ technique that will not allow the climber to ground-fall in the event that one of the belay team members becomes incapacitated, must be incorporated.
Participatory Belay/Team Belay
-
Students may participate as part of a Participatory/Team Belay when:
-
a locking assisted braking device is used AND an instructor lowers the climber, OR
-
a Qualified Instructor’s hands are on the brake rope at all times.
-
Individual Lanyard Systems
-
Students must participate in a ground school which prepares them for the course.
-
Students must be directly supervised at all transitions between elements and each transfer of lanyards, unless using a mechanical control system.
-
Students must not use lanyards for fall arrest (for example, transferring anchor points while climbing vertically).
Supervision
-
Direct Supervision is required when students are participating in the challenge course.
-
On-Site Supervision is required by the Teacher when students are being monitored by a Qualified Instructor(s).
- In-the-Area Supervision is required when the activities are situated at a combination of locations.
Supervision/Monitoring Ratios
-
After the introductory lesson, the following ratios must be maintained:
-
Climb Only: 1 Qualified Instructor per 1 active line
-
Full Belay: 1 Qualified Instructor per 2 active lines
-
Participatory/Team Belay: 1 Qualified Instructor per 2 active lines (3 active lines can be used only if the location of the 3rd line is in close proximity for Direct Supervision)
-
Static/Self Belay: 1 Qualified Instructor per 5 participants
-
-
Student may participate in part of the belay process if:
-
a locking-assisted braking device is used;
-
Direct Supervision occurs; and
-
a Qualified Instructor lowers the climber.
-
Qualifications
Applicable to All Installations
-
Qualified Instructors must be trained in, understand, demonstrate and adhere to a directly relevant skill set for Challenge Courses/Towers – High Elements. A relevant skill set is a described set of skills developed by recognized Challenge Course Professionals.
-
All Qualified Instructors must be at least 18 years of age or older to teach the introductory lesson and/or be a Qualified Instructor.
Applicable to Permanent Installations at a Commercial Site
-
All Qualified Instructors must hold a current certificate demonstrating successful completion of training from an accredited, recognized, challenge course professional training company.
-
The site must have a Challenge Course Manager. The role of the Challenge Course Manager is to make and implement necessary decisions about programming and risk management. The Challenge Course Manager must either have a Challenge Course Manager Certificate or have knowledge and skills equivalent to the course content (for example, knowledge/training relating to staff training and supervision, program administration, development of policies and procedures, risk management, maintenance and inspection, ANSI-ACCT standards and other relevant standards).
Applicable to Permanent Installations on School Sites
- Qualified Instructors for permanent school sites must hold a current certificate (within the last 3 years) demonstrating successful completion of a training workshop that directly addresses the climbing activities they are teaching (for example, Toronto District School Board Guidelines and Standards for Indoor Climbing in-service program).
First Aid
Definitions
Tue, 07/22/25 12:26 pm