Climbing (Ascending Lines)
Elementary - Curricular 2024
-
Grade 4 to 8 only.
-
Portable Installation on School Site, Permanent Installation on School Site, Permanent Installation on Commercial Site
-
Students ascend and descend single lines suspended from anchors.
- Also consult Climbing (General Procedures).
Equipment
-
All equipment must be inspected by qualified personnel prior to activity.
-
All of the equipment must be commercially and specifically manufactured for the intended climbing related activity and adhere to one or more of: UIAA, CE, NFPA, ULC, CSA, ASTM standards.
-
If a belay device is used, the belay rope must be compatible with the chosen belay device and the climbing activity.
-
Climbing harnesses, sit or full body must be appropriate for the age and/or body size of the climber must be used.
-
Helmets:
-
The wearing of a helmet (or not) must be professionally determined based on the existing hazards in the facility (for example, toe/hand holds, features) and/or the operating system (for example, auto-belay).
-
Facilities must provide helmets when their use is not hazardous or when they are required by the school/board, or parents/guardians.
-
When appropriate, helmets that are commercially and specifically manufactured for climbing must be properly fitted (as per manufacturer’s guidelines) and properly worn.
-
-
Mats (for example, Velcro utility mats, wrestling mats) must be in place at the ascending and descending points for all indoor walls.
-
Mat thicknesses:
-
cross-link foam 5 cm (2”)
-
open-cell foam 5 cm (2”)
-
polyurethane 5 cm (2”)
-
dual-density 5 cm (2”)
-
mats of equivalent compaction rating as determined by the manufacturer.
-
-
The top anchors must be able to sustain a load of 22kN/2200kg/4945lbs.
-
Any carabiners used must be the locking type.
-
All of the equipment must be inspected by qualified personnel prior to the activity.
Clothing/Footwear/Jewellery
-
Clothing and footwear appropriate to the activities and environmental conditions must be worn. Tops with drawstrings are not permitted.
-
Exposed jewelry is not permitted.
Facilities
-
The climbing area must be appropriate for the ability levels, age and size of the students.
-
All providers must follow the Ontario Building Code Act, and all applicable By-Laws and Regulations.
-
All of the climbing equipment must be installed by a qualified professional (for example, Qualified Instructor/Outside Activity Provider). The initial installation of climbing equipment must be inspected by qualified personnel upon completion of the installation and at least once a year thereafter by qualified climbing inspection personnel. This inspection must be documented with a written report. Necessary changes noted in the report must be addressed.
Environmental Considerations
Special Rules/Instructions
-
Completed medical forms for each participating student must be accessible.
-
Prior to the first lesson, Teachers must inform Qualified Climbing Instructors of students who have special needs.
-
Risks involved with each activity and how to lower the risk of an injury from occurring must be communicated to the students.
-
Teachers, Qualified Instructors and students must be aware of safety procedures.
-
Activity and course elements that are introduced must be based on skills that are taught and appropriate for the age, ability level, language and and experience of the students.
-
An ascending system and technique recognized by the professional climbing industry must be used (for example, jumar, a prussic knot).
-
A Qualified Instructor must do a safety check of any student leaving the ground.
-
All participants must be attached to 2 independent ascending devices with a separate locking carabiner for each, unless a conventional top-rope system is used in conjunction.
-
A method of rescuing a tired/stuck climber must be available (for example, ladder, scaffold, top-rope belay).
-
Programs may choose to utilize the following fall protection operating systems as a back up:
-
An introductory lesson must be an integral part of the program for all students. The lesson must:
-
be identified as specific to the ascending lines being used
-
be identified as specific to the ascending device used
-
include instruction and repeat practice of:
-
correct use of harness
-
correct use of knots and tie-in points
-
concept of ascending
-
proper use of ascending device
-
general ascending principles
-
lowering/descending procedures
-
-
-
Students must be allowed to select a challenge at their comfort level, including the choice to not participate.
-
Teachers and Monitors must be aware of the possibility of peer pressure and make sure no student is coerced into participating.
-
Students who have been trained and can demonstrate the required instructor skills and who are 16 years of age or older can assist with instruction but must be directly supervised by a Qualified Instructor.
Supervision
Supervision/Monitoring Ratios Applicable to All Installations
-
Introductory lesson: 1 Qualified Instructor per 6 students.
-
After introductory lesson: Grades 4 to 8 – 1 Qualified Instructor per 12 students.
Qualifications
Applicable to All Installations
-
Qualified Instructors must be trained in, understand, demonstrate, and adhere to a directly relevant skill set for Ascending Lines. A relevant skill set is a described set of skills developed by recognized climbing professionals.
-
All Qualified Istructors must be at least 18 years of age or older to teach the introductory lesson and/or be a Qualified Instructor.
Applicable to Permanent School Sites
- Qualified Instructors for permanent school sites must hold a current certificate (within the last 3 years), demonstrating successful completion of a training workshop that directly addresses the climbing activities they are teaching.
First Aid
Definitions
Tue, 07/22/25 12:26 pm